Polyester 700

Polyester 700

Indicated for vehicle body work, gutter, furniture, fiberglass and several metallic parts.

SURFACE PREPARATION

Sand with 80 or 150 grit sanding sheet. Then, clean the part with Maxi Rubber Degreasing Solution.


APPLICATION

• Homogenize the Polyester Compound before its application.

• Remove the desired quantity and put it onto a clean and plane surface.

• Add 1 gram to 3 grams of the catalyst for every 100 grams of the compound.

• Mix it well until you obtain a homogeneous mass.

OBS.: The time elapsed from the mixture of the compound with the catalyst to its application should not exceed 3 to 5 minutes.

• Apply the catalyzed compound using an applicator (celluloid) in thin layers until the defect is corrected.


DRYING

 • Recommended drying time for sanding - 25ºC: 40 minutes.


SANDING DRY

• After the drying, perform the sanding with dry sanding sheet (80 - 150 grit sanding sheets and final with 220 - 320 grit sanding sheets).


• The product should be applied directly over a bare sheet.

• In the compound preparation (catalysis), use the correct quantity of catalyst (1% to 3%), thus avoiding problems, such as bleeding.

• Do not replace the mixture already prepared into the can.

• Wait for the recommended drying time, in order to prevent lapping.

• Avoid forced drying at high temperatures, because it may cause cracking, blistering and loss of adhesion.

• Wet sanding of the adhesive is not recommended, because the humidity retained in the adhesive during the sanding with water may cause problems on the surface and finishing.

• Isolate the repair location with Maxi Rubber Primer PU before applying the finishing.


Packing
  • 700g package with 21g catalytic converter
Shelf life

1 year. Stored at a temperature of 15 to 35ºC and away from humidity.

Yield
  • 0,59 m²/kg
Composition

Polyester Compound: Polyester resin, styrene, mineral load, pigments and additives. Catalyst: Benzoyl peroxide and plasticizers.

São Paulo +55 (11) 4092-7777
Others States 0800 777 0 777