Wash Primer

Wash Primer

Recommended as adhesion promoter and anti-corrosion protector to prepare ferrous and non-ferrous (aluminum, zinc, tin, galvanized and stainless steel) metallic surfaces. 

Widely used for general metallic structure painting.


 SURFACE PREPARATION
Remove part impurities, rust and flaking paint.
Then clean the repaired spot using Maxi Rubber Degreasing Solution


 CATALYSIS
2 parts volume Wash Primer
1 part volume Wash Primer Catalyst / Matt Black

 APPLICATION VISCOSITY
15 - 20 seconds, Ford cup 4 at 25°C

 APPLICATION
Homogenize product before application.
Apply 1 to 2 plain layers with 5- to 10-minute intervals in between.

PISTOL TYPE
Conventional pistol - nozzle: 1.2mm - 1.5mm
Application pressure: 40 - 50 psi
HVLP pistol - nozzle: 1.2mm - 1.5mm
Application pressure: 21 - 36 psi

DRYING
Drying on air at 25°C
Touch: 05 minutes
Handling: 10 minutes
Total: 30 minutes
Oven (at 60°C): 15 minutes
 


Do not dilute Wash Primer, it may lose its original adhesion and resistance characteristics.

Heat part before using Wash Primer on cold, damp days.

Do not sand Wash Primer.

Use a measuring ruler to perform catalysis.

If repainting, wait 20 minutes before applying Primer on Wash Primer.


Packing
  • Packing 600ml
Shelf life

2 year. Stored at a temperature of 15 to 35ºC and away from humidity.

Yield
  • 60 m2 / gallon (10 micron layer)
Composition

Product: vinyl, epoxy and phenolic resins, dyes, loads, additives, and organic solvents.
Catalyst: Phosphoric acid and several solvents.

São Paulo +55 (11) 4092-7777
Others States 0800 777 0 777