Polyester Putty Filler

Polyester Putty Filler

Intended for smoothing out defects on ferrous metallic (Galvanized, Zinc plated or Aluminum) surfaces and fiberglass.



 Sand and degrease repairing spots removing all oil, dirt, corrosion and water. Homogenize the product.

Take desired amount and place on a level, clean surface. Use 1% to 3% benzoyl peroxide catalyst each 100g putty. Mis thoroughly to obtain a homogeneous putty. OBS.: Time from putty/catalyst mixing and usage cannot exceed 3 minutes. Apply catalyzed putty with a celluloid applicator in fine layers applying moderate pressure to ensure better adhesion and finishing. Apply additional layers until defect is smoothed out.

Drying time: @ 25°C. Handling: 03 through 05 minutes. For sanding: 20 to 30 minutes.

Initial sanding 80-150 grain sandpaper, finishing on 220-320 grain sandpaper.

  • Packaging of 900g with catalyst of 15g
Shelf life

1 year. Stored at a temperature of 15 to 35ºC and away from humidity.

  • 0,59 m²/kg

Polyester resin, dyes, loads and additives. Catalyst included with the package.

São Paulo +55 (11) 4092-7777
Others States 0800 777 0 777