White Quick Mass

Surface Preparation

• Sand and degrease the surface to be repaired with Maxi Rubber degreasing solution, removing all impurities.

Aplication

• Homogenize the product before its application.
  
• Apply with celluloid or spatula on the imperfections, in thin and successive layers until obtaining the desired layer for correction of the part, respecting the interval of 3 to 5 minutes between applications/overlays.
  
• After drying (40 min), sand with 220 dry sanding sheet and finish with 320 sanding sheet.

• Do not apply the ultra rapid compound directly over the metallic sheet; in these cases, always use universal primer as background .
• Avoid application in thick layers.
  
• Product ready for use, any type of dilution is not recommended.
  
• In order to prevent absorption of the finishing by the compound, it is recommended to apply an overlay of primer over the region where the compound was applied.
  
• To prevent lapping, wait the indicated drying time to perform the sanding.
  
• Use the recommended sanding sheets.
  
• Forced drying by temperature may cause problems such as crackings, bubbles, and loss of adhesion, among others.